Turn the Raspberry Pi in your drawer into an XL1 block producer. XL1 OxyoNode is Oxyon's open-source kit: the producer, a live dashboard, alerting, and an optional graphical 3.5" touch display. Source and the full setup guide: github.com/OxyonLLC/xl1-oxyonode.
What you get
- An XL1 block producer on a Raspberry Pi 3 B+, running XYO's official producer image unmodified.
- A dashboard on the Pi (
http://<your-pi>:8088) with the producer's health, blocks produced (counted from the chain), rewards, chain status, software and Pi health, and 30-day trends. - Alerts when something needs you, and host security updates applied for you.
- A 3.5" touch display (optional), with three themes. Tap or left-click for the next page; long-press or right-click to go back to the overview; hold for three seconds or middle-click to change theme. Every block your Pi wins gets a celebration.
What you need
- A Raspberry Pi 3 B+ (a Pi 4 works too), a microSD card of 32 GB or more, power, and preferably Ethernet.
- 64-bit Raspberry Pi OS Lite. The kit refuses a 32-bit OS, because its images are arm64.
- An XL1 producer key. XL1 Sequence, XYO's public test network, is open to everyone. Producing on XL1 Mainnet requires your producer address to be on XYO's producer allow list.
- Optional: a 3.5" SPI touch panel (ILI9486 / "PiScreen" type).
The setup, in plain steps
- Write the OS: use Raspberry Pi Imager to put 64-bit Raspberry Pi OS Lite on the card, with a hostname, your user and remote login turned on.
- Copy the kit onto the Pi.
- Check, then provision: run the read-only
preflight.sh(about 30 seconds; it catches a 32-bit OS straight away), thensudo ./provision.sh. Expect 20 to 40 minutes. It installs the container runtime and the firewall, and starts the dashboard. If it stops partway, fix the cause and run it again. - Add your credentials: copy your producer settings file to the Pi over a secure connection (never put it on the SD card), make it readable by root only, and start the producer. Set your reward address in the dashboard settings so the balance panel works.
- Optional screen:
xl1-screen-setup.shbrings up the 3.5" panel. Then the graphical dashboard takes over the display.
The exact commands, and what to do when a healthy node produces nothing, are in the setup guide on GitHub.
A live one
LewSales-pi3 is an XL1 OxyoNode on Mainnet, with more than 52,000 blocks produced. Its numbers are on the XL1 Explorer's producer pages.
Help
- Questions: the UnOfficial XYO Discord or the WinLEW Discord.
- Bugs: issues on GitHub.
OxyoNode is made by Oxyon LLC and is independent of XYO Network. Please don't take OxyoNode issues to XYO.